Urinalysis (Urine Reagent) Strip Test Insert

Immerse the reagent areas of the strip into sample for 1 to 2 seconds. Run the edge of the strip against the edge of the urine container to remove excess urine. Touch the edge of the strip on absorbent paper to avoid mixing chemicals from one pad to another and soiling hands with urine. Place the strip with the reagent area facing upwards onto the Strip Holder. Multi-reagent 10 Parameters Urinalysis Test Strips Each package of Multi-reagent 10 Parameters Urinalysis Test Strips includes a colorful test results control chart. The color of each parameter on the test strip has to be compared to the closest corresponding color on the test results color chart. The level of presence for each parameter is indicated below the colorful control block on the result chart. Predictable results for the reagents: • Leucocytes, • Nitrites, • Ketone, • Bilirubin, • Blood, • Urobilinogen, • Specific Gravity The normal ranges are included in a complete instruction and usage insert. In most cases, for these additional test panels, you want to obtain a normal or negative result meaning that the reagent panel does not change color. A color change in one or more of the reagent panels normally indicates an unexpected result. For example, a significant color change in the leukocyte panel would indicate an elevated level of white blood cells indicating a possible infection. A color change, or abnormal reading in the blood panel could indicate undiagnosed internal bleeding. contact Ritw Wu  /  rita@bioway.com.cn for BIOWAY urinalysis strips